epoxyresinGetting started
How to choose epoxy resin for your first project
Choose a resin by project depth, working conditions and documented limitations before comparing kit sizes.
Read the guide →The resin learning library
A clearer path to your next pour.
Practical epoxy resin guides for planning, safe handling, mixing, casting, coating and fixing common project problems.
Getting started
Getting started
Coating epoxy vs casting epoxy: choose by the pour
Understand why a surface coating and a deep mold need different resin behavior, even when both cure clear.
Read the guide →Planning
Planning
How much epoxy resin do you need?
Calculate mixed volume for coatings, molds and irregular rivers, then plan allowances without changing the mix ratio.
Read the guide →Planning
Plan epoxy temperature and cure time
Build a realistic schedule around material temperature, pour geometry and the difference between working, handling and full cure.
Read the guide →Planning
Outdoor epoxy and yellowing: plan for exposure
Separate water resistance from outdoor durability, and choose a documented finish system with realistic maintenance expectations.
Read the guide →Troubleshooting
Troubleshooting
Prevent epoxy bubbles by finding their source
Separate mixing air, porous-substrate outgassing and trapped pockets before choosing a bubble-control method.
Read the guide →Troubleshooting
Sticky or uncured epoxy: diagnose before recoating
Work through cure conditions, measurement errors and unmixed spots to decide whether to wait, remove or repair.
Read the guide →Techniques
Techniques
Mixing epoxy by weight vs volume
Read ratio labels correctly, calculate component amounts and avoid the measurement errors that leave resin uncured.
Read the guide →Techniques
Coating wood with epoxy: preparation and seal coats
Prepare a sound substrate, seal porous areas and plan the transition from seal coat to final coating.
Read the guide →Techniques
Sanding and polishing epoxy: choose the right finish route
Separate leveling, preparation for a new coat and polishing so each abrasive step serves the intended result.
Read the guide →Techniques
Silicone molds and release agents: check compatibility
Choose a mold around the casting geometry, heat limits and release system, then verify the surface on a sample.
Read the guide →Techniques
Epoxy pigments and alcohol inks: test the complete recipe
Choose a supported colorant, keep additive loading controlled and separate visual effects from claims about the finished resin.
Read the guide →Projects
Projects
Plan a resin river table before the first pour
Work through slab preparation, volume, mold containment, layer limits and finishing before committing a large batch.
Read the guide →Projects
Preserve dried flowers in resin with a test-first plan
Prepare flowers, check color and sealant compatibility, and control placement before making a permanent keepsake.
Read the guide →Projects
Resin coasters and jewelry: plan a small project well
Choose suitable shallow molds, measure small batches accurately and finish pieces for their intended use.
Read the guide →Safety
Safety
Epoxy safety, storage and disposal basics
Read both component safety sheets, prevent exposure and plan cleanup and waste handling before mixing.
Read the guide →Safety
Epoxy and food contact: understand the limits of a claim
Check the exact resin, intended contact conditions and complete finished object before making food-contact claims.
Read the guide →Safety
Remove epoxy from surfaces and skin without spreading the problem
Separate skin cleanup from tool and surface removal, and choose methods around the resin state and substrate.
Read the guide →