epoxyresinWhat to check before choosing this formula
| Mix A : B by volume | 2 : 1 |
|---|---|
| Mix A : B by weight | 100 : 44 |
| Layer and pour limits | Current product markets 2–4 in; complete mass/temperature depth matrix not verified. |
| Working and curing context | TDS gel 18–24 h for 100 g at 77°F; cure 36–48 h. No verified universal working-time value. |
| Workshop conditions | 77°F specified only for TDS 100 g gel test; do not invent universal application range. |
Compare 1.5 gallons kit on Amazon
Superclear Liquid Glass Deep Pour 2:1: check the selected 1.5 gallons kit, included components and current offer. Read the formula limits before choosing it for your project.
As an Amazon Associate I earn from qualifying purchases. We may earn a commission from the paid links on this page. How affiliate links work.
View 1.5 gallons kit on Amazon ↗Liquid Glass Deep Pour: useful depth, incomplete context for a universal recipe
Liquid Glass Deep Pour 2:1 targets thick casting projects, while Superclear Table Top targets coatings. The current Liquid Glass product page advertises two-to-four-inch pours. That headline is useful for narrowing a shortlist, but the verified documents do not provide a complete depth-by-volume-by-temperature table that would justify treating four inches as an unconditional limit.
The distinction between working time and laboratory gel time is especially important here. The linked technical sheet reports an eighteen-to-twenty-four-hour gel time for a 100-gram sample at 77°F. That is not a verified promise of a full day to manipulate a large river pour.
Use the specific Liquid Glass formula name when buying or comparing instructions. The separately listed 24 Hour version has its own documentation. The ordinary Liquid Glass weight ratio is 100:44; its advertised 2:1 ratio is volumetric.
Plan the measuring and mixing stage
Official guide: drill ≥6 min; transfer; another 2–4 min; pour directly.
A universal numerical batch cap was not established in the documents reviewed. Ask the manufacturer to confirm the permitted mixed amount for your planned geometry and temperature.
Allow for the whole cure schedule
TDS gel 18–24 h for 100 g at 77°F; cure 36–48 h. No verified universal working-time value.
Working time, demolding and full service are separate decisions. Record room conditions and actual mixed quantity in your project notes, and do not use a hard surface alone as proof of complete cure.
Limitations & open questions
- Liquid Glass 24 Hour is a separate formula.
- Current-linked 2021 TDS does not supply contextual 2–4 in operating limits; do not present 4 in as universally safe.
A depth ceiling is only one condition. Verify total mixed mass, geometry, temperature and the exact kit revision before planning a pour. A smaller package of the same formula does not automatically change its operating limits.
Exact kit options
These links open the specific kit shown. Compare the included resin and hardener, combined quantity, seller and current offer on Amazon. We do not display cached prices or stock claims.
As an Amazon Associate I earn from qualifying purchases. We may earn a commission from the paid links on this page. How affiliate links work.
Check the selected kit before ordering
Superclear Liquid Glass Deep Pour 2:1: check the selected 1.5 gallons kit, included components and current offer. Read the formula limits before choosing it for your project.
As an Amazon Associate I earn from qualifying purchases. We may earn a commission from the paid links on this page. How affiliate links work.
View 1.5 gallons kit on Amazon ↗Sources & further reading
- Manufacturer product and support guidance
- Manufacturer technical document 1
- Manufacturer technical document 2
Manufacturer documents can change. Match the full formula name and kit instructions. This page is based on document research, not our own product testing.
