epoxyresinWhat to check before choosing this formula
| Mix A : B by volume | 2 : 1 |
|---|---|
| Mix A : B by weight | Not verified—do not infer from the volume ratio. |
| Layer and pour limits | Markets 2–4 in; manual minimum 2 mm; complete volume/depth limits absent. |
| Working and curing context | Manual work 60–80 min; demold/tack-free 8–12 h; full 48–72 h. Product page work 80 min. |
| Workshop conditions | Manual 75–85°F; community guide 73–78°F, RH ≤50–60%. |
Compare 1.5 gallons kit on Amazon
LET'S RESIN Deep Pour Epoxy: check the selected 1.5 gallons kit, included components and current offer. Read the formula limits before choosing it for your project.
As an Amazon Associate I earn from qualifying purchases. We may earn a commission from the paid links on this page. How affiliate links work.
View 1.5 gallons kit on Amazon ↗LET'S RESIN Deep Pour: a separate mix with documents worth cross-checking
LET'S RESIN Deep Pour changes the mixing ratio to two parts resin and one part hardener by volume. Its advertised two-to-four-inch depth range and eighty-minute working period make it a candidate for larger molds and preserved-flower displays, provided the actual project fits the current instructions.
The documentation is not perfectly aligned. The linked manual lists sixty to eighty minutes of work and a 75–85°F working range; the official community guide describes a narrower 73–78°F environment. Both place full cure at approximately forty-eight to seventy-two hours, with volume and temperature affecting the result.
Do not turn the manual's eight-to-twelve-hour demold label into a guaranteed removal time for every shape. It does not specify a reference mass, and the manufacturer says smaller pours cure more slowly. A verified maximum batch size was not established, so the headline depth alone cannot answer every large-project question.
Plan the measuring and mixing stage
Manual ≥3 min; community 3–5 min.
A universal numerical batch cap was not established in the documents reviewed. Ask the manufacturer to confirm the permitted mixed amount for your planned geometry and temperature.
Allow for the whole cure schedule
Manual work 60–80 min; demold/tack-free 8–12 h; full 48–72 h. Product page work 80 min.
Working time, demolding and full service are separate decisions. Record room conditions and actual mixed quantity in your project notes, and do not use a hard surface alone as proof of complete cure.
Limitations & open questions
- Manual and community ideal temperatures differ.
- Tiny pours cure more slowly; 8–12 h demold lacks specified mass.
- Manual contains stray 'Amazing Clear Cast' reference; do not infer formulation identity.
A depth ceiling is only one condition. Verify total mixed mass, geometry, temperature and the exact kit revision before planning a pour. A smaller package of the same formula does not automatically change its operating limits.
Exact kit options
These links open the specific kit shown. Compare the included resin and hardener, combined quantity, seller and current offer on Amazon. We do not display cached prices or stock claims.
As an Amazon Associate I earn from qualifying purchases. We may earn a commission from the paid links on this page. How affiliate links work.
Check the selected kit before ordering
LET'S RESIN Deep Pour Epoxy: check the selected 1.5 gallons kit, included components and current offer. Read the formula limits before choosing it for your project.
As an Amazon Associate I earn from qualifying purchases. We may earn a commission from the paid links on this page. How affiliate links work.
View 1.5 gallons kit on Amazon ↗Sources & further reading
- Manufacturer product and support guidance
- Manufacturer technical document 1
- Manufacturer technical document 2
Manufacturer documents can change. Match the full formula name and kit instructions. This page is based on document research, not our own product testing.
