epoxyresinWhat to check before choosing this formula
| Mix A : B by volume | 1 : 1 |
|---|---|
| Mix A : B by weight | 100 : 83 |
| Layer and pour limits | ≤1/4 in subject to mass/temperature. |
| Working and curing context | Thickens within ~30 min. TDS gel 35±5 min (100 g); 1/4 in tack-free 2.5±0.5 h; thin film 2–8 h; full 24 h depending thickness/temperature. |
| Workshop conditions | Instructions 70–84°F, best 70–74°F; warmer/thicker/larger pours shorten time. |
Compare 1 gallon kit on Amazon
Superclear Table Top Epoxy 1:1: check the selected 1 gallon kit, included components and current offer. Read the formula limits before choosing it for your project.
As an Amazon Associate I earn from qualifying purchases. We may earn a commission from the paid links on this page. How affiliate links work.
View 1 gallon kit on Amazon ↗Superclear Table Top: keep the working window separate from cure time
Superclear Table Top is a coating formula for thin layers. Its instructions allow up to a quarter inch, with the qualification that depth, volume, and room temperature affect the reaction. That makes the product a more natural candidate for a bar or tabletop finish than for filling a deep channel in a single pass.
The published one-to-one ratio is by volume. The linked technical sheet gives 100 parts resin to 83 parts hardener for measurement by weight. Both instructions describe the same intended mixture using different units.
The thirty-minute thickening guidance should be treated as a planning estimate. A larger batch or warmer room can shorten it. The manufacturer calls for prompt application after mixing; the laboratory gel-time figure is not permission to leave a gallon sitting in the bucket. Its twenty-four-hour full-cure claim is also conditional on thickness and temperature.
Prepare two containers before hand mixing
Hand mix for 3–5 minutes until incorporated. The instructions recommend two containers and prompt pouring after mixing.
A numerical batch ceiling was not established for this coating in the reviewed documents. Ask Superclear about the amount needed for your surface area, coating thickness and room temperature before treating the available working minutes as a batch allowance.
Thickening and the conditional 24-hour cure claim
Thickens within ~30 min. TDS gel 35±5 min (100 g); 1/4 in tack-free 2.5±0.5 h; thin film 2–8 h; full 24 h depending thickness/temperature.
For a Superclear tabletop coating, record the batch quantity, film thickness and temperature alongside the cure observations. The small-sample gel result, tack-free stage and full-cure claim describe different endpoints. Reaching one of the earlier stages does not make the surface ready for unrestricted service.
Limitations & open questions
- TDS gel time is not a guaranteed large-batch working window.
- Current linked TDS file is dated 2021 and instructions 2023; no observed new-formula confirmation.
A depth ceiling is only one condition. Verify total mixed mass, geometry, temperature and the exact kit revision before planning a pour. A smaller package of the same formula does not automatically change its operating limits.
Exact kit options
These links open the specific kit shown. Compare the included resin and hardener, combined quantity, seller and current offer on Amazon. We do not display cached prices or stock claims.
As an Amazon Associate I earn from qualifying purchases. We may earn a commission from the paid links on this page. How affiliate links work.
Check the selected kit before ordering
Superclear Table Top Epoxy 1:1: check the selected 1 gallon kit, included components and current offer. Read the formula limits before choosing it for your project.
As an Amazon Associate I earn from qualifying purchases. We may earn a commission from the paid links on this page. How affiliate links work.
View 1 gallon kit on Amazon ↗Sources & further reading
- Manufacturer product and support guidance
- Manufacturer technical document 1
- Manufacturer technical document 2
Manufacturer documents can change. Match the full formula name and kit instructions. This page is based on document research, not our own product testing.
